The motors are designed to drive mechanisms that do not require speed control and are designed to operate in continuous mode S1 from an AC voltage of 6000 V or 10000 V, frequency 50 Hz or 60 Hz, cos φ = 0.9 (leading). When exported to countries with temperate and tropical climates, the motors can be manufactured for 6300 V or 6600 V. Climatic design and accommodation category: U3 or T3. Degree of protection:

• IP00 or IP11;
• SDNZ, SDC - IP43/IP00.

Structural design:

• plain bearings with ring or combined lubrication,
• one or two ends of the shaft,
• installation on paws.

At the request of the customer, the motors can be equipped with magnetic fluid sealants (MFS) for improved bearing sealing. The stator winding leads are brought out to a terminal box or to a foundation pit as agreed with the customer. Cooling systems:

• in IP00 or IP11 protection class - in self-ventilation mode;
• with protection class IP43 - in self-ventilation or forced ventilation mode.

The motors are excited by thyristor exciters with a control system and automatic excitation current control. If necessary, the above machines can be used to manufacture motors for other capacities, voltages and frequencies.

• The technical characteristics of the 6000 V motors are given in Table 1, and 10000 V motors are given in Table 2.
• The overall and connection dimensions of the 6000 V motors are given in Table 3, and 10000 V motors in Table 4.